Echo GT-222ES - Specifications

25
Specifications
Specifications
These specifications are subject to change without notice.
GT-222ES
External dimensions: Length × Width × Height (without cutting at-
tachment)
1460 × 320 × 575 mm
Mass:
Unit without fuel, cutting attachment and harness (ISO11806-1: 2011)
Unit with fuel, specified cutting attachment, guard and harness
Unit without fuel, cutting attachment, guard and harness
4.5 kg
5.1 kg
4.3 kg
Volume: Fuel tank (full) 400 mL
Fuel: Gasoline
Oil
Mixture ratio
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing me-
thyl alcohol or more than 10% of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Standard
(ISO/CD 13738), JASO FC,FD grade and ECHO rec-
ommended.
50:1 part (2%)
Cutting attachment:
Nylon line cutting head (Cutting swath)
Thread
Nylon cord size (diameter)
Nylon cord length
G137
Right-handed thread 3/8×24UNF
3.0 mm
2.0 m
Gear Case: Gear ratio and lubrication
Rotational direction of output shaft viewed from above
maximum rotational frequency of the spindle
1,00 good quality lithium grease
clockwise
7700 r/min
Engine: Type
Carburettor
Magneto
Spark plug
Starter
Power transmission
Engine displacement
Maximum shaft brake power (ISO 8893)
Fuel consumption at maximum engine power
Recommended maximum engine speed (With STD attachment in-
stalled)
Recommended engine idling speed
Air cooled two stroke, single cylinder
Diaphragm type
Flywheel magneto - CDI system
NGK BPMR8Y
Recoil starter
Automatic centrifugal clutch
21.2 cm
3
0.7 kW
0.45 L/h
7200 r/min
3000 ±100 r/min
2006/42/EC
Vibration (ISO 22867) a
hv,eq
Left handle
Right handle
Uncertainty K
4.9 m/s
2
5.4 m/s
2
1.2 m/s
2
Sound pressure level (ISO 22868) LpAeq
Uncertainty K
pA
91.9 dB(A)
1.5 dB(A)
Sound power level (ISO 22868) L
WARa
Uncertainty K
WA
105.0 dB(A)
2.1 dB(A)