Echo PB-9010 T User Manual

PB-9010 H/T ASSEMBLY
X7501200700 21
© 08/20 ECHO Incorporated
Note: Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If
loosening occurs, remove two pipes and install according to
steps 8 and 9.
PB-9010 T
Never perform maintenance or assembly procedures with
engine running or serious personal injury may result.
Install Blower Pipes
1. Assemble clamps (A) and (G)
onto both ends of flexible pipe
(B).
Note: Clamp with cable guide
loop (G) fits elbow end of
flexible pipe.
2. Insert anti-static wire through
flex tube.
Note: A light lubricant may be
used to ease assembly of
flexible pipe to blower
elbow.
A
B
G

Echo PB-9010 T Specifications

General

Engine Displacement	79.9 cc
Air Volume	1110 CFM
Air Speed	220 MPH
Type	Backpack Blower
Starting System	Standard
Fuel Capacity	83.8 fl. oz.
Fuel Tank Capacity	83.8 fl. oz.