Maintenance
Maintenance
Insert the silver coloured spring into
the LPR cap, so that it
rests neatly in the adjuster piston
(See Figure 6.24)
.
Place the gold coloured spring onto
the LPR piston and insert piston
and spring into the LPR cap,
o-ring end first
(See Figure 6.25)
.
Before screwing the LPR cap back
onto your Eclipse Ego, use a dry Q-
tip to clean the seal inside the LPR
body
(See Figure 6.26)
. Lubricate this
seal using a light 3 in 1 oil.
Replace the LPR cap by screwing
it onto the LPR body in the Eclipse
Ego
(See Figure 6.27)
.
FIGURE 6.24
FIGURE 6.25
FIGURE 6.27
FIGURE 6.26
To Next Page
Loading...
