EasyManua.ls Logo

ecodyst Hydrogen - Page 44

ecodyst Hydrogen
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Accelerating the path to discovery
®
Technical Data
D. Stirrer Bearing
Chemglass Stirrer Bearing for 19mm polished stirrer shaft
Flake-Free
Chemically Resistant
Vacuum (~5 Torr) and Pressure (~5 PSI)
Polymer Blend Sleeve Provides Excellent Wear Resistance
For Use with Polished Glass or S.S. Stirrer Shafts
PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. The stabilizer
series incorporates a PEEK
®
/PTFE stabilizing bushing that is molded to the lower
portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on
larger vessels. The bearing consists of a PTFE standard taper body, Glass lled
polypropylene screw cap, PEEK
®
Compression spring, PEEK
®
/PTFE sleeve and a
glass lled polypropylene loosening nut.
Ace Glass Stirrer Bearing for 19mm and 28mm polished stirring shaft
Self-aligning, lubricant free PTFE Trubore bearing or combination bearing / debris
trap. Use with19mm or 28mm polished glass stir shafts. Debris trap model
prevents bearing-wear particles from contaminating the evaporator vessel and has
a side port for clean-out, evacuating or purging. You can stir in either direction and
achieve vacuum down to 1mm Hg.
E. High Viscosity PTFE Agitators
High viscosity agitator, made entirely of PTFE and glass lled PTFE, provides
excellent stirring at the bottom of 12L through 200L evaporators, especially
when heavy slurries are being mixed. Agitator attaches to stir shaft by both a
compression tting and a glass lled PTFE safety pin. PTFE, large-scale, multi-
paddle agitator design to accept pinned bottom valves.
F. Polished Glass Stirrer Shafts
Precision ground and polished stirrer shaft for use with EcoChyll Evaporator
Systems. 19mm OD for used with 12, 22, 50 and 72 liter and heavy duty 28mm
28mm OD for use with EcoChyll 100- and 200-liter systems.
G. O-Rings
Precision ground and polished stirrer shaft for use with EcoChyll Evaporator
Systems. 19mm OD for used with 12, 22, 50 and 72 liter and heavy duty 28mm
28mm OD for use with EcoChyll 100- and 200-liter systems.