Ecolab Aquanomic - Page 47

47
Screen
Description
7.0
System Info
Proceeding from here will allow the user to view and clear System Errors for the system as a
whole, or broken down for each of the 3 washers.
<ENTER>
Proceed to view or clear System Errors
7.5
System Errors
There are several types of System Errors that are logged by the system. In the following screens,
a matrix is displayed with icons assigned to each error. These are defined as follows:
A.
Unexpected power down reset error
B.
Communication Error – I/O Module
C.
Communication Error – MSI Module
D.
Communication Error – FS Module
<ENTER>
Proceed to view System Errors
Total System Error
Counts
See description of System Errors above.
Narrow down System Errors for a certain period of time (provided the controller
clock has been properly set up – Quick Setup > 4. Date & Time)
7.5.1
Washer System Error Counts
For the selected washer, System Errors are shown for each of the 15 formulae.
Narrow down System Errors for a certain period of time (provided the controller
clock has been properly set up – Quick Setup > 4. Date & Time)
7.5.2
Confirm Clear System Errors
Clears System Errors for the entire system.
<YES>
Confirm selection