Ecolab Aquanomic - Submenu #3.0 System Menu

25
Quick Setup #2.0
1. Select Location North America
2. Unit of Measure Standard
3. Number of WEs 3
4. Date & Time
5. Can customer prime? No
6. Product Pickup Probe Standard
7. Alarm Volume 5
8. Alarm Mute Time 2.5
7. ALARM VOLUME 5
Quick Setup>Alarm Volume #2.7
5
2.2.8 Submenu #2.8 Quick Setup>Alarm Mute Time
Adjust the alarm mute time using this screen.
Quick Setup #2.0
1. Select Location North America
2. Unit of Measure Standard
3. Number of WEs 3
4. Date & Time
5. Can customer prime? No
6. Product Pickup Probe Standard
7. Alarm Volume 5
8. Alarm Mute Time 2.5
8. ALARM MUTE TIME 2.5
Quick Setup>Alarm Mute Time #2.8
2.5
2.3 Submenu #3.0 System Menu:
Program Menu
1. Account Menu
2. Quick Setup
3. System Menu
4. Formula Menu
5. Prime Pump
6. Calibration
7. View System Info
8. Diagnostics
3. SYSTEM MENU
2.3.1 Submenu #3.1 System Menu>Washer Settings:
- To Copy washer settings from a washer to another, select the washer you want to copy from, and press SK#3 <Copy>.
Then Select the washer you want to copy into and press SK#3 <Yes> to confirm a selection
Setup WE>Select Washer #3.1
1. WASHER 1
2. Washer 2
3. Washer 3
System Menu #3.0
1. WASHER SETTINGS
2. Detergent
3. Bleach
4. Finish
5. Optional Form Select
6. Optional Solid Product4
7. Optional Liquid Product
8. Select Textile Type
9.Reset Setup Menu
10. Reset All
1. WASHER SETTINGS 1. WASHER 1
Setup WE>Washer1 #3.1.2
1. COPY SETUP TO WASHER 2
2. Copy Setup to Washer 3
1. COPY SETUP TO WASHER 2
- To edite washer settings, Select a washer to set up Name, Capacity, Chart Stop feature (Yes/No), Additional Flush,
Signal Validation Time, and Signal Mode (Standard/MicroMode). Press SK#2 <Edit> to setup the desired washer.