Main IO circuit board communication error
Main power reset (to entire system)
Disable (an audio alarm or a step)
Home - SK#1
Go to the main idle screen (or Ready screen) to select a washer or go to the password
protected screen for programming the system
Status or more information is offered
Select a formula from main idle screen. Note the use of the arrow.
Modify a formula: Cancel or activate/deactivate. Note the use of the pencil.
Status of Machine Signal Interface (MSI) module
Time Period: to allow for specifying reporting time period parameters (washer load
counts, error logs, etc.)
Prime function - SK #4
Set up in programming mode to allow for customer (or user) to prime product pumps to
washer when an empty container is replaced.
1.1.2.4 Programming Icons
Use Left or Right Arrow keys to adjust a programming item
Use Up or Down Arrow keys to scroll through sub-menus displayed in screen
To Next Page
Loading...
