72
7.4 Viewing Load Counts
The production load counts of each formula on each washer are available through AQUANOMIC EU recording. To access
the data, follow the instructions below.
To view/access total system Load Counts, press Soft Key #3 Load Counts from the Condor idle screen.
The load counts for all washers will be displayed. Use the Up/Down arrow keys to browse load counts for each
washer. Press Soft Key #1 <Back> to return to the Condor main idle screen.
To view/access total system load counts specific to each washer, highlight the desired washer before
selecting SK#3 load counts. The formula list for the washer will be displayed. Use the Up/Down arrow
keys to browse load counts for all formulae.
To Next Page
Loading...
