Ecolab ECO - Technical Data; 6.1 Product identification and order number; 6.2 Dimensions and weight

6 Technical data
In the main operating manual (417101649 Dosing station ECO,
Ä Table on page 3) you will find detailed information on all points
mentioned here!
It is imperative that you observe the listed safety regulations as described
in
Ä Chapter 2 ‘Safety’ on page 18 described. Please contact Ecolab
Engineering GmbH if you have any further questions or require technical
explanations.
6.1 Product identification and order number
Every metering station has a separate product ID and order number
.
The contents of the product ID and the structure of the order number are explained in
more detail below.
Product identification
The metering station is identified using a type plate (
Ä Chapter 1.6 ‘Product designation /
type plate’ on page 13). The type plate provides you with the key technical data and order-
related information at a glance.
Fig. 6: Type plate
6.2 Dimensions and weight
Specifications for transport
The transport unit consists of a half pallet and a package containing the metering station
Data Value Unit
Depth 600 mm
Width 800 mm
Height 1250 mm
Weight (approx.) 35 kg
Technical data
54417101656 Rev. 01-10.2019