EasyManua.ls Logo

Ecolab ECO - Page 82

Ecolab ECO
118 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING!
The system is intended solely for processing validated chemicals.
If any chemicals other than those specified are to be used, please contact
the manufacturer to obtain their approval.
Contact information for Ecolab can be found in (
Ä
Chapter
1.5 ‘Manufacturer's service and contact address’ on page 12).
The standard dosing stations are not suitable for products with special
hazards. In particular, the use of organic peroxides requires approval by the
manufacturer. Contact the manufacturer to discuss the need for additional
protective measures for your application.
It was developed, designed and manufactured for use in commerce and
industry. Private use for personal applications is strictly prohibited!
Any use extending beyond the intended scope of use and/or other types of
usage is regarded as misuse.
CAUTION!
Usage as per specification also comprises observance of operating,
maintenance and repair processes and all included documentation of the
system components as stipulated by the manufacturer
.
NOTICE!
The documentation of the system components are attached in a separate
chapter of this manual and must also be taken into account.
Within this manual the following important data from the system
documents have been already integrated:
Safety instructions
Maintenance instructions and maintenance intervals
Technical Data
WARNING!
Danger due to misuse!
Misuse can result in dangerous situations:
Never use different dosing media than the specified product.
Never modify the dosing set values of the product over the tolerable
limit.
Never use in potentially explosive atmospheres.
The system must not be used with non approved products.
Maintenance cycles have to be kept.
Safety
21 417101656 Rev. 01-10.2019

Related product manuals