Ecolab Lubo-DryExx - Connection; DryExx Connection Overview; DryExx Wall Mounting Guide

417101634_Lubo-DryExx_Advanced
- 39 -
Rev. 07-01.15
6. Connection
6.1 Connection Overview: DryExx
®
fig. 6.1
Unit type 182830
fig. 6.2
Unit type 182831
Pos
Description
1
User connection, R ¾“
2
3/2-Way-Solenoid valve, pre-control valve
3
2/2-Way-Diaphragm valve, pneumatic controled
4
Return connection for hose 12/21
5
Lubricant connection, pressure side.
6
Lubricant connection via suction lance
7
Diaphragm compressed air pump
8
Compressed air connection, applicator pump
9
Compressed air filter regulator
10
Compressed air connection, 8/6
11
3/2-Way-Solenoid valve, control valve pump
6.2 Wall Mounting: DryExx
®
30
25
360
Lubo DryExx®
410
550
For wall mounting the following parts are supplied:
Pcs.
Description
Article no.
4
Wood screws, 8 x 60 mm
413110926
4
Wall fixing plugs
417200005
4
Spacer
38631302
4
Disc
413500313
Make sure there is adequate access for
maintenance to be carried out!
fig. 6.3
CAUTION
Install the metering station as close as possible to where the lubricant is stored (canister,
barrel, container, tank) to ensure that the suction tubing is as short as possible.