Ecolab Lubo-DryExx - Technical Data; Hardware Technical Data; Control System Technical Data

417101634_Lubo-DryExx_Advanced
- 55 -
Rev. 07-01.15
12. Technical Data
12.1 Lubo-DryExx
®
- Hardware
Pump
Diaphragm compressed air pump
Performance
0 - 25 l/min
Applicator back pressure
max. 7 bar
Air pressure control
max. 7 bar
Air use
approx. 0.2 Nm³/h
Compressed air connection
8/6 x 1 / 10/8 x 1 mm
Conveyor belt lubricant connection:
suction side
pressure side
12/21 x 4.5 PVC fabric hose
R ¾"
Number of lubrication circuits:
dependent on control unit
Dimensions (H x W x D)
550 x 410 x 220 mm
Weight
approx. 10 kg
Material: Console / Cover
Stainless steel
12.2 Lubo-DryExx
®
– Control System DryExx
®
Advanced
Power supply
120-500 V, 50/60 Hz
Control voltage
max. 24 V/DC
Received power
max. 2kVA
Back-up fuse
max. 10 A
Control module
Siemens S7-313C
Display/operation
Touch Panel TB170B 4,7” widescreen
No. of lubricating circuits
max. 16
No. of systems
max. 10
Weight
approx. 30 kg
Dimensions
600 x 600 x 210 (W x H x D) mm
Case material
Stainless steel
Protection class
IP 65
Fixation method
Fixation to wall
IMPORTANT
Please change the battery of the steering unit after 5 years, if not you can loose data of
system and variable data.
Please change the battery only with power on the steering unit.
Type of batterie: 3 Volt, lithium, CR2450 (5 mm)