Ecolab Lubo-DryExx - Archive Data Selection; System Selection from Archive; Circuit Selection from Archive

417101634_Lubo-DryExx_Advanced
- 42 -
Rev. 07-01.15
7.3.3.1 Archive selection
fig. 7.5
• To go to the ‘Daily Archive’ menu
 Press ‘Current Day
• To go to the ‘Monthly Archive’ menu:
 Press ‘Current Month’
• To go to the ‘Yearly Archive’ menu:
 Press ‘Yearly Archive’ after selecting the
required month using the selection field beneath
‘Yearly Archive’
• To leave the ‘Archive Selection’ screen:
 Press ‘Back’
OR
• To go to the ‘Start’ screen:

Press " "
If you leave the screen using the ‘Back’ button, the main screen appears again.
7.3.3.1.1 System selection
fig. 7.6
The screen only displays Area if the valves are
allocated.
• To go to the ‘Circuit Selection’ screen:
 Press ‘System xx’
• To leave the ‘System Selection’ screen:
 Press ‘Back’
OR
• To go to the ‘Start’ screen:
 Press " "
NOTE
The selection screens for the daily, monthly, and yearly archives are identical.
If you leave the screen using the ‘Back’ button, the ‘Archive Selection’ screen appears again.
7.3.3.1.1.1 Circuit selection
fig. 7.7
The screen only displays Area if the valves are
allocated.
• To go to the ‘Archive for Circuit xx’ screen:
 Press ‘Circuit xx’
• To leave the ‘Circuit Selection’ screen:
 Press ‘Back’
OR
• To go to the ‘Start’ screen:
 Press " "
NOTE
The circuit selection screens for the daily, monthly, and yearly archives are identical.
If you leave the screen using the ‘Back’ button, the archive ‘System Selection’ screen appears
again.