EcoNet Cardio-M Plus - System Setup; Reset

26/83
Version 1.0
Cardio
CardioCardio
Cardio-
--
-M Plus
M PlusM Plus
M Plus Operation Manual
Operation ManualOperation Manual
Operation Manual
5) System Setup
Reset
Press the VIEW key on the control panel for more than three seconds to initialize the
system setup to the factory mode. In three seconds, the following messages are
displayed for a second and then reset starts.
SYSTEM MESSAGE
Factory Default Setting
Loading...
* Defaults Are As Follows:
Sensitivity (SENS) 10mm/mV
Printing speed (SPD) 25mm/s
Grid (GRID) Off
Channel form (FORM) 6ch+1rhy
Rhythm channel (RHY) II
Base Line filter (BASE) On
EMG filter (MUSC) Off
Power noise filter (AC)
60Hz when ENG, ENG_US setting
50Hz for other languages
Low pass filter (LPF) 40hz
Diagnosis (Diagnosis) On
Stored Data (List) Delete
Pace Maker (P/M) Off
Lead Fault (L/F) On
Unit Setting(unit) cm/kg
Beat form On
Monitoring Form Continue
QRS Sound Off
File Save Off
Printer Line Normal