55/83
Version 1.0
Cardio
CardioCardio
Cardio-
--
-M Plus
M PlusM Plus
M Plus
Operation Manual
Operation ManualOperation Manual
Operation Manual
7) Copy Mode Printing
Copy Mode Printing is a function to print out the same report as the previously printed
report. In Copy Mode, users can also print out the same previous data but with
changed settings such as filter type, sensitivity, printing speed, channel form, and
rhythm number if more than one rhythm is recorded.
Copy Mode can be entered by pressing the COPY ( )key following an EKG
recording. After pressing the COPY Key, the following message will be displayed on the
LCD screen, and the printing process will start:
SYSTEM MESSAGE
Printing…
If Copy Mode Printing is called without performing an EKG recording, there would be
no EKG data to copy. In this case, the following message box will be displayed for 1
second, followed by the setup status of the system being displayed:
SYSTEM MESSAGE
No ECG recorded!
Note
If the original record time was less than the recording time required by the
output printout, copy will not function.
If you change the filter setup from the previously saved EKG data, the following
message will be displayed with the changed filter being applied:
SYSTEM MESSAGE
Copy Processing…
When the filter application is completed, the following message will be displayed, and
the printing process will start:
To Next Page