INSTRUCTIONS MANUAL
-66-
Connect and open HP and LP coupling to A/C system, then press OK to continue; the following
screen will be displayed:
Insert the temperature probe into the cabin’s air vent then press OK:
Start the engine and switch ON the A/C system, set the medium level fan’s speed, then press
OK:
The following screen will be displayed:
When the diagnosis routine is finished, the following screen will be displayed:
Press OK prints the options or BACK to exit.
R134a DEVICES
DYNAMIC DIAGNOSIS
Connect and open HP and LP coupling to A/C
system press OK
R134a DEVICES
DYNAMIC DIAGNOSYS
Insert the temperature probe into the cabin’s air
vent then press OK
R134a DEVICES
DYNAMIC DIAGNOSIS
Start the engine and switch ON the A/C system,
set the medium level fan’s speed,
then press OK
R134a DEVICES
DYNAMIC DIAGNOSIS
Diagnosis
in progress
LP= x.xbar
R134a DEVICES
DYNAMIC DIAGNOSIS
Diagnosis response
Press OK to print the options
or BACK to exit
To Next Page
Loading...