EN
10
3. Operating and Programming
AUTO Cleaning Mode
Intensive Cleaning Mode
This is the most commonly used mode. In AUTO Cleaning Mode, DEEBOT 6 cleans in a straight line
and changes direction when it meets an obstacle.
This mode is good for aggressive cleaning or for extremely dirty or dusty oors. In this mode, DEEBOT 6
is more sensitive to dirt and dust and performs a more thorough cleaning. In this mode, DEEBOT 6 follows
the same cleaning pattern as AUTO Cleaning Mode, but performs a more thorough cleaning.
3.3 Cleaning Mode Selection
DEEBOT 6 has several Cleaning Modes for you to choose from to effectively clean different
floors. Cleaning Modes are selected using the robot’s Control Panel Buttons or using the
Remote Control.
Pause DEEBOT 6 before switching Cleaning Modes.
*
To Next Page
Loading...
