ECOVACS Winbot 9 - Place the Safety Pod; Spray Cleaning Solution

9
EN
3.6 Spray Cleaning Solution
3. Operating the Robot
3.5 Place the Safety Pod
The Safety Pod MUST be placed
on the inside of the window.
Press the Safety Pod FIRMLY on the
inside of the window being cleaned.
Make sure the Safety Pod is attached
securely in place.
WINBOT 9 should only be used with WINBOT Cleaning Solution. Using other cleaners
signicantly reduces WINBOT’s performance and can damage the robot.
*
Spray each side of the Cleaning Pad with the
provided WINBOT Cleaning Solution 3 times.
The Cleaning Pad should be damp, not wet.
After spraying, wipe the bottom of WINBOT 9
with the provided Finishing Cloth.