2
ECOWATER
SYST E MS
Unpacking
The parts required to assemble and install the unit are included in a parts bag.
Thoroughly check the unit for possible shipping damage and parts loss. Also inspect and note any damage to
the shipping carton.
Remove and discard (RECYCLE) all packing materials. To avoid loss of small parts, we suggest you keep the
small parts in the parts bag until you are ready to use them.
ECOWATER
SYST E MS
Table of Contents
Unpacking and Inspection 2
Dimensions/Specifications 3
Wiring Schematic 3
Safety Guides 5
Water Conditioning Information 5
Assembly 7
Planning Installation 8
Installation 11
Programming the Faceplate Timer 16
Customizing Features/Options 18
Routine Maintenance 25
Troubleshooting Guide 27
Repair Parts 30
FOR FUTURE REFERENCE, ENTER THE FOLLOWING INFORMATION
MODEL NO. ¡©
CODE ©
WATER HARDNESS
SERIAL NO. ¡©
INSTALLATION DATE
IRON CONTENT PPM
¡ on registration decal © on shipping carton
To Next Page
Loading...
