ECOWITT WN1900 - Setting Started; Contents; Sensor Array Set up

5
consideration when choosing console or mounting locations. Make
sure your display console is at least five feet away from any electronic
device to avoid interference.
5. Setting Started
If only the original sensor array is paired with the display, the console can be
operated with 2pcs AA batteries, it doesn’t need to be powered by DC power!
2 AA batteries will last 6 months when data published to www.ecowitt.net
weather service at 5 minutes interval.
5.1 Contents
QT
Y
Item Description
1
Display Console
1
Outdoor Sensor with built-in: Thermo-hygrometer / Rain Gauge /
Wind Speed Sensor/ Wind Direction Sensor
1
Wind speed cups (to be attached to outdoor sensor body)
1
Wind vane (to be attached to outdoor sensor body)
2
U-Bolts for mounting on a pole
4
Threaded nuts for U-Bolts (M6 size)
1
Metal mounting plate to be used with U-Bolts
1
Wrench for M6 bolts
1
USB to 2.5*0.7mm DC 5V power plug connector cable
1
User manual (this manual)
Table 2: Package content
If components are missing from the package, or broken, or any problem
during the operation, please contact customer service at
support@ecowitt.com or support.eu@ecowitt.net (EU/UK). to resolve
the issue.
5.2 Sensor Array Set Up