22
Motherboard User’s Guide
Halt On Setting
This item defines the operation of the system POST (Power On Self Test)
routine. You can use this item to select which types of errors in the POST are
sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. These
are display-only fields. You cannot make changes to these fields.
Advanced BIOS Features Page
This page sets up more advanced information about your system. Handle this
page with caution. Any changes can affect the operation of your computer.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
CPU Feature (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
f
Phonex-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Help Item
Allows BIOS to skip certain
tests while booting. This will
decrease the time needed to
boot the system.
f
X
X
CPU Feature [Press Enter]
Removable Device Priority [Press Enter]
Hard Disk Boot Priority [Press Enter]
CD-ROM Boot Priority [Press Enter]
Network Boot Priority [Press Enter]
CPU Internal Cache [Enabled]
External Cache [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Security Option [Setup]
Video
This item defines the video mode of the system. The motherboard has a built-in
VGA graphics system; you must leave this item at the default value.
f
f
f
f
To Next Page
Loading...
Need help?
General
