27
Chapter 3: BIOS Setup Utility
Advanced Chipset Features Page
These items define critical timing parameters of the motherboard. You should leave
the items on this page at their default values unless you are very familiar with the
technical specifications of your system hardware. If you change the values incorrectly,
you may introduce fatal errors or recurring instability into your system.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
Frame Buffer Size
This item enables users to specify the Onboard VGA share memory size.
GPU Bank Flip
This item enables or disables GPU Bank flip.
PMU (Disabled)
This item enables or disables ACPI power management unit function.
Onboard GPU
This item enables the onboard GPU function. Disable this item if you are going to
install an external GPU.
K8 NB HT Speed (Auto)
This item enables users to set the speed of HyperTransport between the CPU and
Northbridge.
K8 <-> NB HT Width (Auto )
This item enables users to set the HyperTransport width between CPU and the
Northbridge .
lk
Phonex-AwardBIOS CMOS Setup Utility
Advanced Chipset Features
Help Item
Menu Level
f
f
Onboard GPU [Enable If No Ext GPU]
Frame Buffer Size [64M]
GPU Bank Flip [Disabled]
PMU [Disabled]
CPU Frequency [200.0]
K8<->NB HT Speed [Auto]
K8<->NB HT Width [Auto]
DRAM Configuration [Press Enter]
PCIE Spread Spectrum [Disabled]
SATA Spread Spectrum [Disabled]
HT Spread Spectrum [Disabled]
PCIE Clock [100Mhz]
SSE/SSE2 Instructions [Enabled]
TPM Control [No Change]
System BIOS Cacheable [Disabled]
To Next Page
Loading...
Need help?
General
