ECS A13G Series

3
Chapter 1: Introduction
Fast Ethernet LAN (optional)
• Built-in 10Base-T/100Base-Tx IEEE 802.3u fast Ethernet transceiver
• Low-power mode
• MII and 7-wire serial interface
USB 2.0
• Compliant with Universal Serial Bus Specification Revision 2.0
• Compliant with Universal Host Controller Interface Specification
Revision 1.1
BIOS Firmware
This motherboard uses Award BIOS that enables users to configure many
system features including the following:
• Power management
• Wake-up alarms
• CPU parameters and memory timing
• CPU and memory timing
The firmware can also be used to set parameters for different processor clock
speeds.
Dimensions
• Micro-ATX form factor of 244 x 214 mm
Note: Hardware specifications and software items are subject to change
without notification.