ECS BSWI-D2

Chapter 2
BSWI-D2 USER MANUAL
17
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
2-4-4. Connecting Case Components
No. Components No. Components
1 CPU_FAN 3 SYS_FAN
2 F_PANEL 4 ATX_POWER
1 & 3. CPU_FAN (CPU Cooling FAN Connector) & SYS_FAN (System Cooling FAN
Connector)
Users please note that the fan connector supports the CPU cooling fan of 1.1A
~ 2.2A (26.4W max) at +12V.
Connect the CPU cooling fan cable to CPU_FAN.
Connect the system cooling fan connector to SYS_FAN.