29
Using BIOS
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
cha
nges to the Windows Date and Time Properties utility.
SATA 1~4/Primary IDE Master/Slave
f
CMOS SETUP UTILITY - Copyright (C) 1985-2007, American Megatrends, Inc.
SATA 1
Type
LBA/Large Mode Auto
Block Mode Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T Auto
32Bit Data Transfer Enabled
Help Item
Select the type
of device connected
to the system.
Device : Not Detected
Auto
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default settings
F1: General Help
mn
< >
Your computer has one IDE channel which can be installed with one or two devices
(Master and Slave). In addition, this motherboard supports six SATA channels and
each channel allows one SATA device to be installed. Use these items to configure
each device on the IDE channel.
SATA 1
SATA 1 Not Detected
SATA 2 Not Detected
SATA 3 Not Detected
SATA 4 Not Detected
Standard CMOS Setup
This option displays basic information about your system.
Date Tue 03/10/2008
f
Primary IDE Master Not Detected
Primary IDE Slave Not Detected
Help Item
f
CMOS Setup Utility -- Copyright (C) 1985-2007, American Megatrends, Inc.
Time 00:06:58
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
IDE BusMaster Enabled
Drive A: 1.44 MB 3
1
/
2
”
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default settings
F1: General Help
mn
< >
f
f
f
f
For the purpose of better product maintenance, the manufacture reserves
the right to change the BIOS items presented in this manual. The BIOS
setup screens shown in this chapter are for reference only and may differ
from the actual BIOS. Please visit the manufacture’s website for updated
manual.
To Next Page
Loading...
Need help?
General
