37
Using BIOS
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
PCI / PnP Setup
iGPU and Ext-VGA Selection Single
Init Display First
PCI
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Press <Esc> to return to the main menu setting page.
Select Internal VGA or
External VGA CARD to
display
iGPU and Ext-VGA Selection (Single)
Use this item to select internal VGA or external VGA card to display.
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default settings
F1: General Help
mn
< >
To Next Page
Loading...
Need help?
General
