33
Using BIOS
Press <Esc> to return to the main menu setting page.
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
DRAM Timing Mode (Auto)
This item enables you to specify the DRAM timing mode to be configured automati-
cally or manually.
Share Memory Auto Detection (Auto)
Disable this item to set the Share Memory Size. And if the item is set to Auto, Share
Memory Size can be controlled according to the dram size. When the dram size is
less than 512 MB, Share Memory Size should be set to 64 MB. While between 512
MB and 1 GB, it should be set to 128 MB. When more than 1 GB, it should be set to
256 MB.
DCT Unganged Mode (Auto)
This item is used to select the DCT mode (DRAM Controller mode).
Hybrid SLI support (Disabled)
This item allows users to enable or disable the NVIDIA
®
Hybrid SLI technology.
Memory Hole Remapping (Enabled)
This item allows users to enable or disable memory hole remapping.
To Next Page
Loading...
Need help?
General
