38
Using BIOS
CPU Configuration
The item in the menu shows the CPU.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit. When supports
Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.
Enabled for windows XPand
Linux (OSoptimized for
Hyper-Threading
Technology) and Disabled
for otherOS (OS not
optimized for
Hyper-Threading
Technology). when Disabled
only one thread per
enabled core is enabled.
Main Advanced Chipset M.I.B III Boot Security Exit
Enter/Dbl Click : Select
CPU Configuration
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
EMT64 Supported
Processor Speed 3400 MHz
Processor Stepping 206a7
Microcode Revision 17
Processor Cores 4
Intel HT Technology Supported
Hyper-threading Enabled
Limit CPUID Maximum [Disabled]
Execute Disable Bit [Enabled]
Intel Virtualization Technology [Enabled]
Power Technology [Energy Efficient]
Enhanced Halt (C1E) [Enabled]
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
This is display-only field and diaplays the information of the CPU installed in your
computer.
EMT64 (Supported)
This item shows the computer supports EMT64.
Processor Speed (3400MHz)
This item shows the current processor speed.
Processor Stepping (206a7)
This item shows the processor stepping version.
Microcode Revision (17)
This item shows the Microcode version.
Processor Cores (4)
This item shows the core number of the processor.
Hyper-threading(Enabled)
This item only available when the chipset supports Hyper-threading and you are
using a Hyper-threading CPU.
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC/Right Click: Exit
F4: Save & Exit
mn
/Click: Select Item
lk
: Select Screen
To Next Page
Loading...
Need help?
General
