40
Using BIOS
SATA Configuration
Use this item to show the mode of serial SATA configuration options.
Press <Esc> to return to the Advanced Menu page.
Serial-ATA Controller 0 (Compatible)
Use this item to select the Serial-ATA controller options: Disabled, Compatible,
Enabled.
SATA Mode (IDE Mode)
Use this item to select SATA mode.
Serial-ATA Controller 1 (Enhanced)
Use this item to select the Serial-ATA controller options:
SATA 6Gb/s Controller Mode (AHCI Mode)
Use this item to select the controller options of the 6Gb/s Serial-ATA.
SATA Port1~4 (Not Present)
This motherboard supports five SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel,
and each channel allows one SATA device to be installed. Use these items to configure
each device on the SATA channel.
(1) IDE Mode. (2) AHCI
Mode.
Main Advanced Chipset M.I.B III Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
SATA Configuration
SATA Mode [IDE Mode]
Serial-ATA Controller 0 [Compatible]
Serial-ATA Controller 1 [Enhanced]
SATA 6Gb/s Controller Mode [AHCI Mode]
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 Not Present
Press <Esc> to return to the SATA Configuration page.
To Next Page
Loading...
Need help?
General
