28
Using BIOS
BIOS Navigation Keys
The BIOS navigation keys are listed below:
Press the delete key to access the BIOS Setup Utility.
KEY FUNCTION
Move
mnlkmnlk
mnlkmnlk
mnlk
Phoenix-AwardBIOS CMOS Setup Utility
Virus Protection, Boot Sequence...
F10: Save & Exit Setup
mnlk: Select Item
ESC: Quit
Value
Exit
+/-/PU/PD
ESC
Enter
Select
General HelpF1
SaveF10
Fail-Safe Defaults
Previous Values
F5
F6
F7
Optimized Defaults
f
f
f
f
f
f
f
Using BIOS
When you start the Setup Utility, the main menu appears. The main menu of the
Setup Utility displays a list of the options that are available. A highlight indicates
which option is currently selected. Use the cursor arrow keys to move the highlight
to other options. When an option is highlighted, execute the option by pressing
<Enter>.
Some options lead to pop-up dialog boxes that prompt you to verify that you wish to
execute that option. Other options lead to dialog boxes that prompt you for infor-
mation.
Some options (marked with a triangle
ff
ff
f) lead to submenus that enable you to change
the values for the option. Use the cursor arrow keys to scroll through the items in the
submenu.
In this manual, default values are enclosed in parenthesis. Submenu items are denoted
by a triangle
ff
ff
f.
The default BIOS setting for this motherboard applies for most conditions
with optimum performance. It is not suggested to change the default
values in the BIOS setup and the manufacture takes no responsibility to
any damage caused by changing the BIOS settings.
Standard CMOS Setup
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PCI/PnP Configurations
PC Health Status
Load Performance Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
To Next Page
Loading...
