35
Using BIOS
Small Logo (EPA) Show (Disabled)
Enables or disables the display of the EPA logo during boot-up.
ATA 66/100 IDE Cable Msg. (Enabled)
This item enables or disables the display of the ATA 66/100 Cable MSG.
OS Select For DRAM > 64MB (Non-OS2)
This item is only required if you have installed more than 64 MB of memory and
you are running the OS/2 operating system. Otherwise, leave this item at the
default.
Press <Esc> to return to the main menu setting page.
Full Screen LOGO Show (Enabled)
This item enables or disables the display of full screen logo.
Advanced Chipset Features
These items define critical timing parameters of the motherboard. You should leave
the items on this page at their default values unless you are very familiar with the
technical specifications of your system hardware. If you change the values incor-
rectly, you may introduce fatal errors or recurring instability into your system.
Phoenix-AwardBIOS CMOS Setup Utility
Advanced Chipset Features
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Spread Spectrum Control [Press Enter]
System Clocks [Press Enter]
FSB & Memory Config [Press Enter]
System Voltages [Press Enter]
LDT Frequency [5x]
System BIOS Cacheable [Disabled]
Video RAM Cacheable [Disabled]
NVIDIA GPU Ex [Disabled]
Item Help
Menu Level
f
f
f
f
f
f
CPU Spread Spectrum [Center Spread]
PCIE Spread Spectrum [Down Spread]
SATA Spread Spectrum [Disabled]
LDT Spread Spectrum [Disabled]
Item Help
ff
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Spread Spectrum Control
Spread Spectrum Control (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
mnlk
mnlk
To Next Page
Loading...
