42
Using BIOS
SuperIO Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
X
Phoenix-AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
ff
Menu Level
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Onboard FDC Controller (Enabled)
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1 (3F8/IRQ4)
This option is used to assign the I/O address and interrupt request (IRQ) for onboard
serial port 1.
Press <Esc> to return to the main menu page.
mnlk
To Next Page
Loading...
