ECS P49G Series User Manual (English)

To Next Page

Motherboard User’s Guide

This publication, including photographs, illustrations and software, is under the

user’s guide, nor any of the material contained herein, may be reproduced without

the express written consent of the manufacturer.

The information in this document is subject to change without notice. The manufac-

turer makes no representations or warranties with respect to the contents hereof

and specifically disclaims any implied warranties of merchantability or fitness for

any particular purpose. Further, the manufacturer reserves the right to revise this

publication and to make changes from time to time in the content hereof without

obligation of the manufacturer to notify any person of such revision or changes.

Trademarks

IBM, VGA, and PS/2 are registered trademarks of International Business Machines.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered trademarks of

Intel Corporation.

Microsoft, MS-DOS and Windows XP/Vista/7 are registered trademarks of Microsoft

Corporation.

AMI is a trademark of American Megatrends Inc.

It has been acknowledged that other brands or product names in this manual are

trademarks or the properties of their respective owners.

Static Electricity Precautions

1. Don’t take this motherboard and components out of their original static-

proof package until you are ready to install them.

2. While installing, please wear a grounded wrist strap if possible. If you

don’t have a wrist strap, discharge static electricity by touching the bare

metal of the system chassis.

3. Carefully hold this motherboard by its edges. Do not touch those compo-

nents unless it is absolutely necessary. Put this motherboard on the top of

static-protection package with component side facing up while installing.

Pre-Installation Inspection

1. Inspect this motherboard whether there are any damages to components

and connectors on the board.

2. If you suspect this motherboard has been damaged, do not connect power

to the system. Contact your motherboard vendor about those damages.

P49G Series, V1.0

December 2009

Need help?

Do you have a question about the ECS P49G Series and is the answer not in the manual?

ECS P49G Series Specifications

General