DIGITAL ECU TUNER 3 – User Manual
-Dyno start marker, marking the beginning of the area of the log used for generating the dyno graph,
- Dyno end marker, marking the end of the log used for generating the dyno graph,
- Make dyno graph, generating the dyno graph.
5) Area marked by using the Dyno start/end marker option,
6) Options of displaying the device’s outputs and inputs on the log. Every signal is logged, even when it’s not
marked as a displayed signal. Smooth Graph option switches on filtering of the displayed data, which causes
the straightening of the curves. Enable log option turns the logging on/ off. It is important that rewinding and
analyzing of the log is possible only when the option Enable Log is turned off.
7) Zoom In / Zoom Out – zooming in or zooming out of the graph area.
Page 38
www.ecumaster.com
To Next Page
Loading...