DIGITAL ECU TUNER 3 – User Manual
Minimal PC configuration
For the correct functioning of the device, the following minimal configuration is required:
• Windows 2000, XP, Vista , Windows 7
• 128/256/512 MB RAM
• Resolution, at least 1024x768 16bit,
• 600MHz CPU or better,
• USB
Elements of the set:
• DET 3 device,
• USB AA cable,
• Connector,
• A set of connector pins,
• CD with the software, drivers and the user’s manual in English,
• Additional set of resistors and a rectifying diode, useful for the installation of the device.
Firmware
Firmware is the internal software of the device which is responsible for its functioning. Because Firmware is
upgradeable, it is possible to update it, which will make the device more functional in the future. Additionally, to
use a new firmware, a proper software (client) should be used for Windows. The software is compatible
‘backwards’, which means that the new version of the software for Windows works with all previous versions of
the device’s firmware. The latest software can be found at www.ecumaster.com .
Page 5
www.ecumaster.com
To Next Page
Loading...