Unpacking
-------------------------------------------------------------------------------------------------------------------------------------------
1. Unpacking
(1) Lay the unopened TOYDIY on the floor.
(2)Open the box, remove the lid and take out TOYDIY user manual. It is
recommended that you follow the steps in the user manual to install and know
the contents in the box. If you nd that anything described in the manual is
missing, please contact your vendor.
(3)Take out the pearl cotton used for buffer protection.
B EcubMaker TOYDIY basic setup and installation
---------------------------------------------------------------------------------------------------------------------------------------
--------
15
Unpacking
-------------------------------------------------------------------------------------------------------------------------------------------
Unpacking
-------------------------------------------------------------------------------------------------------------------------------------------
Unpacking
-------------------------------------------------------------------------------------------------------------------------------------------
(4)RFrom the box (grab the red box in the picture below. Do not grab the
yellow circle, so as not to damage the machine.) Take out the machine and use
scissors to cut the two tie bands that hold the machine and the pearl cotton.
To Next Page
Loading...
