------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
--------
04
This manual is designed to let new and old customers understand and become
familiar to the operation of the EcubMaker TOYDIY 4in1 3D Printer (herein
after referred to as TOYDIY). Let you know how to use our machines correctly.
Please read this manual carefully, even if you have been used the other 3D
printers of Ecubmaker. Compared with the previous 3D printers, the TOYDIY
has made further improvement in many aspects. This manual will introduce
those improvement one by one.
In sections A and B, you will learn some basic Settings, such as how to unpack
properly and how to do the basic Settings. Section C~E mainly introduces how
to level, print, maintain and repair.
We are glad that you choose TOYDIY 4in1 3D printer. This manual will let you
know about the operation of TOYDIY, make you create more possibilities in the
3D world.
Before using the TOYDIY, you must read the safety instructions on the
next page. We are not responsible for any personal damage caused by
violation operation and disobey the safety instruction when using TOYDIY.
Warning: The FDM Toolhead and FDM-Dual Toolhead contain heating
elements. Do not touch the nozzle directly by your hands to avoid scald.
After printing, let TOYDIY cool down to indoor temperature before
cleaning.
Warning: Laser Toolhead contains Laser device. Make sure you wear
Safety Glasses when are using it. Do not stare at the laser directly without
Safety Glasses.
Warning: CNC Toolhead contains high-speed motor, violation operation
may cause damage to engraver, make sure you wear Safety Glasses.
Warning: Never leave the TOYDIY unattended while operating – always
stay within sight. Look at it frequently.
Warning: Before inspecting the TOYDIY, please plug it out first, and make
sure it has been powered off.
Warning: Do not move the axis by hand directly , otherwise the driver
chip on the motherboard will be burnt.
A
Welcome to choose EcubMaker
Disclaimer
To Next Page
Loading...
