Setup Ecubware
--------------------------------------------------------------------------------------------------------------------------------------------
1. Introduction to EcubWare
EcubWare is a 3D model slicing software. It is only suitable for TOYDIY
made by EcubMaker. TOYDIY does not support other slicing software.
Please download the detailed parameter Settings and instructions from
the official website.
2.EcubWare installation
EcubWare only supports Windows 7 above 64-bit operating systems.
Apple mac OS is not currently supported.
About firmware and software updates
In order to continuously improve the product features, the firmware
and software of this product are constantly being updated. The latest
version of firmware and software will be uploaded to EcubMaker's official
website(http://ecubmaker.com),There are detailed tutorials on how
to update firmware and software on the official website.It is strongly
recommended to use the latest slicing software and firmware.
File self-extracting...
Click next
---------------------------------------------------------------------------------------------------------------------------------------
--------
C
EcubWare installation and instructions
32
To Next Page
Loading...
