Common faults
-------------------------------------------------------------------------------------------------------------------------------------------
Reason Inspection: it is necessary to set an appropriate load or unload
temperature (ensure that the load or unload temperature of PLA material is
above 195 degrees). After the temperature setting is work, the extruder on the
back of TOYDIY can be checked for normal rotation after heating. If not, the
extruder is abnormal. If the extruder is working normally and makes a tatata
sound, it is a sprinkler plug.
Solution: If a jam appears, check out the nozzle disassembly tutorial.
11.FDM print rst layer non-stick base plate
Probem: In FDM 3D printing, the rst layer is always unstuck and warped.
Reason Inspection : Limited by the power and size of the whole machine,
TOYDIY can not print ABS material. Usually, if there is no large plane at
the bottom of the model, it is recommended to print raft. When printing PLA
material, it is recommended to set the base plate temperature to 50; Coating
the printing platform with solid glue will be good to bonding the model and the
base plate.
Solution: Follow the recommended to set model parameters , and the effect
of using solid glue is very ideal.
12.Laser Engraving in the printing process points of light is very
large, did not carve out the pattern
Problem: When using the Laser engraving function, you can see that the laser
is open with photoelectricity, but the spot of light is very big, and no pattern is
carved.
Reason Inspection: when the distance between the laser and the workpiece
surface is the focal length, the light spot is a very small point; When it's not in
focus, it's a big dot.
Solution: Determine the reason the print is not in focus. Please place the
processed object before printing. The Laser Toolhead will detect the thickness
of the processed object. If the work is not placed when the Laser Toolhead
is set to zero after the start of printing, the work thickness must be specied
with the work thickness parameter in EcubWare. See instructions for video
or instructions for Laser printing section. If it is determined that it will be
performed as required and if it is still unable to focus, the focal length needs to
be adjusted. Refer to the corresponding chapter for specic methods.
13.CNC Craving and milling in the printing process, part of the
processing pattern, another part of the processing pattern
Problem: CNC craving and milling processing, processing surface in some
places have traces, some places do not.
Reason Inspection: because of the cutter and processing surface is not level,
so part can not be processed.
Solution: CNC carving washing function at the time of use, the printer
is unable to realize automatic leveling function, users need in preparing
product installation, set processing origin, judging by moving the XY plane of
the machined part and tool level degree, in the bottom of the lower part by
increasing the mat to adjust processing surface level degree. Please refer to
the section of CNC craving in the manual for details.
E
Common faults
------------------------------------------------------------------------------------------------------------------------------------------
--------
72
To Next Page
Loading...
