CADENCE II Fetal Monitor User Manual
- 52 -
8.2 Cleaning
In order to avoid infection, clean and disinfect the monitor and accessories after each use.
8.2.1 Cleaning of the Monitor
WARNING :
Unplug the monitor from the AC power source and detach all accessories before
cleaning.
Clean the monitor enclosure with a soft cloth and diluent non-caustic detergents, such as soft soap
water, Tensides, Ethylate and Acetaldehyde.
Clean the screen with a dry soft cloth.
CAUTION :
1) Although the monitor is chemically resistant to most common hospital cleaners and
non-caustic detergents, other cleaners are not recommended and may stain the
monitor.
2) Many cleansers must be diluted before use. Follow the manufacturer’s directions
carefully to avoid damaging the monitor.
3) Don’t use strong or chemical solvents, such as acetone, acidic or alkali solutions.
4) Never use an abrasive such as steel wool or metal polish.
5) Do not allow any liquid to enter the product, and do not immerse any part of the
monitor into any liquid.
6) Avoid pouring liquids on the monitor while cleaning.
7) Do not remain any cleaning solution on the surface of the monitor.
NOTES:
1) The monitor surface can be cleaned with hospital-grade ethanol and dried in air or
with crisp and clean cloth.
2) The manufacturer has no responsibility for the effectiveness of controlling infectious
disease using these chemical agents. Please contact infectious disease experts in
your hospital for details.
8.2.2 Cleaning of the Accessories
WARNING :
Detach the accessory from the monitor before cleaning.
To Next Page
Loading...
Need help?
General
