H10 Finger Oximeter User Manual
- 47 -
Disinfecting the Oximeter:
WARNING
Before disinfecting the oximeter, make
sure that the oximeter is switched off
and batteries are taken out.
To disinfect the oximeter, follow these
steps:
1. Switch off the oximeter and take out
the batteries.
2. Wipe the display screen using a soft,
clean cloth dampened with the disinfectant
solution.
3. Wipe the exterior surface of the
equipment using a soft cloth dampened with
the disinfectant solution.
4. Wipe off the disinfectant solution with
a dry cloth after disinfection if necessary.
To Next Page
Loading...
