EDAN H10 - Appendix II EMC Information; A2.1 Electromagnetic Emissions

H10 Finger Oximeter User Manual
- 64 -
Appendix II
EMC Information-Guidance and
Manufacture’s Declaration
Refer to the following tables for specific
information regarding this device’s
compliance to IEC/EN 60601-1-2.
A2.1 Electromagnetic Emissions
Guidance and manufacturer’s declaration – electromagnetic
emissions
H10 is intended for use in the electromagnetic environment
specified below. The customer or the user of H10 should assure that
it is used in such an environment.
Emissions test
Compliance
Electromagnetic
environment -guidance