iSE Series Electrocardiograph User Manual Entering Patient Information
3. Enter the sorting criteria, e.g. Outp./Inp./PE ID, name, request ID etc. Tap OK.
4. Patient information that meets the criteria is displayed. To cancel sorting, tap .
Patient information before sorting is displayed.
To queue patient information:
1. Tap in the Patient tab. Select Sequence Setting from the pop-up menu.
2. Configure the setting. The queuing criteria include order date and patient name. Two
sequences are available, up and down, which means ascending and descending.
3. When you are done, tap OK. Patient information is displayed in your desired order.
- 36 -
To Next Page
Loading...
