EDAN iSe Series - Transmitting and Exporting ECGs; Transmitting ECGs to Server; Exporting ECGs to USB

iSE Series Electrocardiograph User Manual Transmitting and Exporting ECGs
Chapter 8 Transmitting and Exporting ECGs
To transmit ECGs to server:
1. Configure SFTP server in System Setting > Transmission Setting > Server Setting.
2. Open ECG File tab.
3. Tap . Select the ECGs you want to transmit. Or tap Select All to select all the
ECGs.
4. Tap again to upload the ECGs to the server.
NOTE:
Do not talk on the phone or send messages when you are using your 4G card for ECG
upload. Otherwise ECG transmission will be affected.
To export ECGs to a USB storage device:
1. Connect a USB disk to the left side of iSE electrocardiograph.
2. Open ECG File tab.
3. Tap . Select the ECGs you want to export. Or tap Select All.
4. Tap again to export the ECGs to the USB storage device.
- 45 -