EDAN SE-12 Series - Page 102

SE-12 Series Electrocardiograph User Manual Technical Specifications
- 96 -
Input Impedance:
≥100MΩ (10Hz)
Input Circuit Current:
≤0.01μA
Input Voltage Range
≤±5 mVpp
Calibration Voltage:
1mV±2%
DC Offset Voltage:
±900mV
Minimum Amplitude:
20 μVp-p
Noise:
≤12.5 μVp-p
Multichannel crosstalk
≤0.5mm
Filter
AC Filter: On/Off
DFT Filter:
0.01Hz/0.05Hz/0.15Hz/0.25Hz/0.32Hz/0.5Hz/0.67Hz
EMG Filter: Off/25Hz/35Hz/45Hz
LOWPASS Filter: 350Hz/300Hz/270Hz/150Hz/100Hz/75Hz
CMRR
≥140dB (AC ON)
≥123dB (AC OFF)
Pacemaker Detection
Amplitude
±500uV to ±700 mV
Width
30μs to 2.0 ms
External Input/Output
Input
≥100kΩ; Sensitivity 10mm/V±5%;
Single ended
Output
≤100Ω; Sensitivity 1V/mV±5%;
Single ended
WIFI (Configurable)
Transmitting Frequency
2400-2497MHz
Frequency Band
2400-2497MHz
Wireless protocol
IEEE 802.11b/g/n