SE-12 Series Electrocardiograph User Manual Operation Instructions for Exercise ECG
- 67 -
2. Connect the electrocardiograph to the treadmill or the ergometer.
CAUTION
Only the treadmill/ergometer recommended by the manufacturer can be connected to
Serial Port 1 and Serial Port 2.
1) Connect the electrocardiograph to the treadmill
NOTE: The position of the RS232 port may be different on different treadmills.
2) Connect the RS232 port of the ergometer to the RS232 port of the electrocardiograph
with an RS232 cable.
NOTE: The position of the RS232 port may be different on different ergometers.
3) Connect the electrocardiograph to the ergometer
4) Connect the RS232 port of the ergometer to the RS232 port of the electrocardiograph
with an RS232 cable.
NOTE: The position of the RS232 in port may be different on different ergometers.
3. Connect the electrocardiograph to the stress BP monitor
To Next Page
Loading...
