SE-12 Series Electrocardiograph User Manual Operation Instructions for Exercise ECG
- 74 -
3. Setting Default Protocols
Select a protocol on the Protocol Manager screen by pressing the Up or Down arrow, and press
Select to set the selected protocol as the default protocol.
4. Deleting Protocols
Pressing Del All on the Protocol Manager screen can delete all the protocols from the
electrocardiograph.
Or, you select a protocol on the Protocol Manager screen, select Delete, and then press Enter to
delete the selected protocol from the electrocardiograph.
NOTE: Only the customized treadmill protocol can be deleted.
5. Restoring Protocols
Pressing Restore on the Protocol Manager screen can restore the factory settings.
6. Return
Pressing Return on the Protocol Manager screen can return to the System Setup screen for the
exercise test.
To Next Page
Loading...
