EDAN SE-1200 Express - Page 105

SE-12 Series Electrocardiograph User Manual
Technical Specifications
Input Circuit Current:
≤0.01μA
Input Voltage Range
≤±5 mVpp
Calibration Voltage:
1mV±2%
DC Offset Voltage:
±600mV
Minimum Amplitude:
20 μVp-p
Noise:
≤12.5 μVp-p
Multichannel crosstalk
≤0.5mm
AC Filter: On/Off
DFT Filter:
Filter
0.01Hz/0.05Hz/0.15Hz/0.25Hz/0.32Hz/0.5Hz/0.67Hz
EMG Filter: Off/25Hz/35Hz/45Hz
LOWPASS Filter: 300Hz/270Hz/150Hz/100Hz/75Hz
CMRR
≥140dB (AC ON)
≥123dB (AC OFF)
Sampling Frequency
16,000/sec/channel
Pacemaker Detection
Amplitude
±750uV to ±700 mV
Width
50μs to 2.0 ms
Sampling Frequency
16,000/sec/channel
External Input/Output
Input
≥100kΩ; Sensitivity 10mm/V±5%;
Single ended
Output
≤100Ω; Sensitivity 1V/mV±5%;
Single ended
WIFI (Configurable)
Transmitting Frequency
2400-2497MHz
Frequency Band
2400-2497MHz
- 92 -