SE-12 Series Electrocardiograph User Manual System Setup
10.10 System Maintenance Setup
Default (Only in the U.S.)
If you set the system password in the
System Maintenance
window, you
need enter the password before opening the System Setup screen.
Default (Only in the U.S.)
The external output socket is equipped in the electrocardiograph,
through which the electrocardiograph can send rhythm lead signals to
Choose from: Off, Standard or Triggered
Select Standard, the electrocardiograph sends ECG signals of rhythm
lead 1.
Select Triggered, the electrocardiograph sends pulses with the height
of 5V and the width of 45ms, based on the data of rhythm lead 1.
- 56 -