SE-12 Series Electrocardiograph User ManualOperation Preparations
SE-12/SE-12 Express/SE-1200/SE-1200 Express:
Step 1Step 2 Folded paper / Rolled paperStep 3
1) Press the casing button downwards and remove the casing to open the recorder.
2) Take off the wrapper of the new folded paper, and then put it in the paper tray.
3) Pull the paper out with the grid side facing the thermal print head, and replace the casing
on the recorder.
If rolled paper is used, Place the paper and the roller gently in the recorder with the roller
pin clicking into the groove. Pull the paper out with the grid side facing the thermal print
head.
4) Press down the recorder casing firmly.
SE-1201 A5 paper：
Step 1Step 2
1) Press the casing button downwards to open the recorder.
2) Take off the wrapper of the new folded paper, and then put it in the paper tray with the
grid side facing the thermal print head.
3) Close the recorder casing firmly.
- 33 -
To Next Page
Loading...
